“Every time the season changes, my jawline seems to get erased – I have to rely on photo editing for profile shots.” This is a real concern for many women over 35. While thread lifting can provide immediate lifting, traditional large V‑threads often “over‑pull,” leading to stiff expressions and visible thread marks; ordinary smooth threads lack enough pulling power and last too short a time. The Korean Mint Minimally Invasive SMAS Anchoring Thread Lift System uses “gradient tension threads” and “multi‑point SMAS anchoring” technology to lift the deep fascia while preserving the freedom of facial muscles – providing a natural upward lift without stiffness, with results lasting over 2 years.
Traditional large V‑threads use thick, barbed threads to “hook” superficial tissues, with lifting force concentrated in the subcutaneous fat and superficial dermis. Although immediate results are visible, the effect fades after the threads are absorbed (usually 6‑12 months), and they often cause issues like “facial stiffness” and “thread‑track depressions.” Ordinary smooth threads are safer but lack sufficient anchoring power, making them nearly ineffective for moderate‑to‑severe sagging.
More critically, traditional thread lifts only apply “unidirectional lifting” without considering the “dynamic balance” of facial expression muscles – excessive pulling can make expressions unnatural, looking like you’re “forcing a smile.” The “multi‑point anchoring” concept of the Mint thread lift establishes multiple “anchor points” in the SMAS layer to distribute the lifting force, allowing facial tissues to move upward while still maintaining natural dynamic expressions.
The Mint Thread Lift (Mint Lift) is a minimally invasive thread‑lifting system focused on “SMAS layer anchoring.” It uses a patented “gradient tension thread” – the barb density and thickness gradually change from one end to the other: sparse barbs near the entry point (reducing tissue damage) and dense barbs at the anchor points (increasing lifting power). During the procedure, the surgeon makes small incisions (about 3mm) in front of the ear or within the hairline to precisely pass the thread through the SMAS layer, establishing 2‑3 “anchor points” on sturdy structures like the zygomatic ligament and parotid fascia. The “gradient tension” then lifts and repositions the lax SMAS and soft tissues upward.
Unlike traditional large V‑threads, the lifting force of the Mint thread is distributed across multiple anchor points, avoiding the depressions and stiffness caused by “single‑point over‑tightening.” The thread is made of absorbable poly‑p‑dioxanone (PPDO), which gradually degrades over 18‑24 months. During degradation, it continuously stimulates collagen neogenesis, forming “autologous ligaments” that replace the thread’s support, significantly prolonging the effect. The procedure is performed under local anaesthesia, takes about 1‑1.5 hours, and is followed by only mild swelling – normal social activities can resume in 3‑5 days, and results last 2‑3 years.
Traditional large V‑threads typically have only one “anchor point,” concentrating all the lifting force at a single point, which can cause local depressions and tissue pulling sensations. The Mint thread establishes “anchor points” at three locations – the zygomatic ligament, preauricular fascia, and mandibular periosteum – evenly distributing the lifting force across multiple directions. This “multi‑point suspension” model ensures that facial tissues are repositioned upward with balanced force from all directions, avoiding “over‑tightening” or “asymmetrical pulling,” resulting in natural expressions and smooth dynamic movement.
The barb density of the Mint thread gradually transitions from “sparse” to “dense” from one end to the other. When entering subcutaneous tissue, the sparse barbs reduce “cutting” damage to surrounding tissues; when reaching the anchor points, the dense barbs provide stronger “grip” and “anchoring” power. This design makes the lifting process more “progressive” – tissues are gently “guided” to new positions rather than forcibly “pulled,” resulting in less post‑operative swelling and faster recovery.
The Mint thread features “bi‑directionally spiral barbs” arranged in a helical pattern. Regardless of how the thread rotates in the tissue, at least one direction of barbs will “engage” the tissue. This multidimensional fixation significantly improves thread stability, reducing the risk of migration or extrusion. At the same time, the spiral barbs distribute force more evenly, preventing “thread tracks” or “dimples” on the skin surface.
The Mint thread gradually degrades over 18‑24 months after implantation. The lactic acid signals released during degradation continuously stimulate fibroblasts to form a “collagen sheath” around the anchor points. As the thread degrades, the collagen sheath transforms into dense “autologous ligaments” that take over the support function. This “thread‑guided, autologous‑supported” mechanism keeps the lifting effect stable for 2‑3 years, with gradual rather than abrupt decline.
Natural feel: The lifting effect is “progressive” – the face is not “suspended” but “supported,” with natural expressions and smooth dynamic movement – no “mask‑like” appearance.
Harmonious integration: The multi‑point anchoring ensures even force distribution, simultaneously improving the jawline, cheekbones, and nasolabial folds – no imbalance of “some areas too tight while others remain loose.”
Personalised precision: Anchor positions and thread tension are customised based on each individual’s facial anatomy (direction of SMAS laxity, skin thickness, fat distribution) – no “one‑size‑fits‑all” template.
Long‑lasting durability: After the collagen sheath transforms into autologous ligaments, results last 2‑3 years, with a gradual decline – no need for “yearly re‑does.”
| Dimension | Traditional Large V‑Thread | Smooth/Spiral Thread | Mint Thread Lift (Multi‑Anchoring) |
|---|---|---|---|
| Target layer | Subcutaneous superficial layer, fat layer | Superficial dermis | SMAS + subcutaneous layer |
| Anchoring method | Single‑point anchoring | No anchoring (simple lift) | 3‑point distributed anchoring |
| Thread design | Uniform barbs | Spiral or smooth | Gradient tension + bi‑directional spiral barbs |
| Lifting force | Concentrated, prone to stiffness | Weak, short duration | Evenly distributed, natural lifting |
| Recovery time | 1‑2 weeks swelling | 3‑5 days | 3‑5 days mild swelling |
| Duration | 6‑18 months | 6‑12 months | 2‑3 years |
Those with severe bleeding disorders, uncontrolled hypertension or diabetes, pregnancy or breastfeeding, or active infection/skin disease in the treatment area should be evaluated by a doctor first.
💰 Cost Reference
In Korea, the cost of the Mint thread lift varies by the number of threads, anchor points, and additional procedures (e.g., neck lift, fat grafting). The basic plan (3 pairs of threads on the mid‑lower face, 6 anchor points) is approximately 13,000,000 – 19,000,000 KRW; the full‑face enhancement plan (mid‑lower face + jawline + neck, 5 pairs of threads, 10 anchor points) is about 18,000,000 – 26,000,000 KRW; if combined with autologous fat grafting or neck lifting, the total cost ranges from 23,000,000 – 35,000,000 KRW. The above includes surgical fees, anaesthesia, thread materials, and post‑operative check‑ups, but excludes hospital stay (usually a day‑surgery procedure).
🕒 Recovery Timeline
Days 1‑3: Facial swelling, mild bruising, and a tight sensation – a compression garment is required. Gentle walking is allowed; avoid bending down, stooping, and laughing excessively. Ice packs help reduce swelling.
Days 4‑7: Swelling gradually decreases, bruising fades, and sutures (at incision sites) can be removed. Light household chores are possible, but avoid strenuous exercise and facial massage.
Weeks 1‑2: Most swelling resolves, and the initial lifting effect becomes visible – expressions are natural. Office work and social activities can resume. Continue wearing the compression garment at night to promote tissue adherence.
Month 1: Swelling largely subsides; the lifting effect stabilises – jawline sharpens, cheekbones lift. Light aerobic exercise (e.g., brisk walking, yoga) can resume, but avoid facial massage and high‑temperature saunas.
Months 3‑6: The collagen sheath begins to form, further enhancing the lifting effect – facial contours become tighter and more natural. A follow‑up visit is recommended at 3 months to evaluate results and plan future maintenance.
Facial sagging is the slow‑motion “loss of control” of the SMAS layer – it silently retreats, causing the whole face to follow. The significance of the Mint thread lift is not to forcefully “yank” it back, but to re‑establish “support points” through multiple anchors, gently guiding the SMAS to its proper position under its own tension. When you look in the mirror and see a sharper jawline, when you see your cheekbones no longer “wandering,” you’ll understand – true lifting is not about fighting gravity, but about reconciling with your own tissues.